Troy-Bilt Parts
We sell only genuine Troy-Bilt ® parts.
Search By Model or Part Number
or
Popular Troy-Bilt Product Types See All
Popular Troy-Bilt Parts
This is a genuine OEM replacement part, it is sold individually.The purpose of this filter is to help eliminate dirt, dust and debris from contaminating the carburetor and damaging the engine.A dirty air filter can cause the engine from operating properly.This filter can be cleaned a time or two by using an air supply. But it is advised to replace it once it becomes dirty.
This is an authentic replacement part manufactured for use with Craftsman walk-behind lawnmowers. The blade is angled to allow the clippings to rotate through the cutting deck to produce fine clippings for side discharge and mulching. Lawnmower blades wear out over time and can cause the grass blades to tear making frayed endings that can diminish the look of the lawn. A new mower blade will allow...
This genuine OEM replacement part is used on walk behind/push mowers. This cable consists of a metal wire cable with z-type bent ends and rubberized cover/body. The control cable stops the blade when the control handle is released on walk-behind mowers. If the cable is broken it will cause the brake to not release even when the lever is pressed.You may need pliers to complete this repair.• First...
This is an authentic manufacturer sourced replacement cotter pin. It is a standard hardware commonly used on a variety of Craftsman lawn and garden equipment. Depending on the model of your equipment it will be used in different locations to secure two parts together. Please make sure to check appropriate diagrams for correct application for this part. This metal cotter pin is sold individually. I...
This is a genuine OEM replacement part, it is sold individually.The purpose of the 738-04124A Shear Pin is to protect your snowblower.If the auger gets jammed or clogged, the Shear Pin is designed to snap at a certain point of pressure, so it will not damage any other part of the unit.
This is an authentic OEM part. The MTD deck engage cable is composed of metal and plastic parts, and has been designed for use in several tractor machines. This part is fastened onto the frame assembly. The deck engage cable works to move belt idler pulley and engage the cutting blades. Please refer to manual for specific repair instructions. A wrench and a screwdriver is helpful in making the rep...
This is a genuine OEM replacement part, it is sold individually. This is the front wheel on the models shown below.There are two of them on each mower.The wheel has a ring gear on the inside which is driven by the Right hand and Left hand smaller gear that attaches to the front axle on the transmission assembly.
This OEM fuel tank assembly is made out of Plastic and it includes the fuel lines, fuel cap, and fuel filter. It is a common part in gas trimmers that is used to hold the fuel needed for the engine. It is very important to replace the fuel tank if it is cracked or damaged to avoid further damage or serious injuries. Make sure to drain the gas tank before starting a repair.
This replacement v-belt is an authentic OEM sourced component which is commonly utilized on Craftsman riding lawn mowers and garden tractors. It is the main deck belt that drives the blades, over time it may wear out and stretch eventually requiring a replacement to maintain peak performance. When replacing this belt make sure to clean the pulleys off to ensure top performance and the longevity of...
A carburetor basically consists of an open pipe through which the air passes into the inlet manifold of the engine. The pipe is in the form of a Venturi: it narrows in section and then widens again, causing the airflow to increase in speed in the narrowest part. Below the Venturi is a butterfly valve called the throttle valve — a rotating disc that can be turned end-on to the airflow, so as to h...
This is a genuine manufacturer-sourced replacement hardware that is commonly utilized on Craftsman lawn and garden equipment. A lock nut is a type of nut that resists loosening when it is properly threaded onto a bolt. This is a standard hardware which has multiple applications depending on your unit, make sure to check appropriate diagrams for correct location and use of this item. Please note th...
This is a manufacturer approved O-Ring designed for lawn and garden equipment. This is the O-Ring that provides an Air Tight seal between Carburetor and Cylinder Head. If doing maintenance on carburetor it is recommended to replace the O-Ring instead of re-using the old one. Over time rings and seals tend to dry out and would no longer provide proper seal compromising engines performance.
Popular Troy-Bilt Models
All Troy-Bilt Product Types
Troy-Bilt Attachment Parts
Troy-Bilt Blower Parts
Troy-Bilt Brush Cutter Parts
Troy-Bilt Chainsaw Parts
Troy-Bilt Chipper Parts
Troy-Bilt Composter Parts
Troy-Bilt Cultivator Parts
Troy-Bilt Edger Parts
Troy-Bilt Lawn Mower Parts
Troy-Bilt Lawn Tractor Parts
Troy-Bilt Log Splitter Parts
Troy-Bilt Misc Tool Parts
Troy-Bilt Pressure Washer Parts
Troy-Bilt Snowblower Parts
Troy-Bilt Tiller Parts
Troy-Bilt Trimmer Parts
Lawn Equipment Parts Repair Articles
Same Day Shipping
Toll Free Support
Repair Help & Videos
Customer Comments
Many thanks for the information regarding my Troy-Bilt pressure washer.
Mawaram Supan
eReplacementParts is proud to be the Preferred Partner of dozens of leading equipment brands that build the gear you love. That means our inventory and availability are unmatched, and in some cases, we are the exclusive parts providers for these brands for their OEM parts programs.
Thank you!
Your email, , has been added to our mailing list.
Error
We were unable to add your email to our mailing list.
Copyright © 2025 eReplacementParts.com Inc.
