Easy
15-30 minutes
Genuine Makita replacement part, this part is sold individually.
This is the dust nozzle for the Makita Belt Sanders listed below.
The Dust Bag part number 122562-9 attaches to it.
It does not include the part number 213415-4 O-Ring which secures the Nozzle into the housing.
Dust Nozzle 416497-7
OEM part for: Makita
Part Number: 416497-7
$5.95
Factory Backorder
Date Available: Unknown 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Dust Nozzle will fit the following 2 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 2 of 2 matching models.
2 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Makita
This item works with the following types of products:
- Sander
Repair Videos ?
Watch the Repair Video for
Dust Nozzle
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Easy repair
Quick and easy repair and a perfect fit! The price was fine.... as with alll things being shipped these days, the shipping cost is a little more than hoped for...
but that's not necessarily the suppliers fault.
John -
July 7, 2023
Verified Purchase
Worked as expected
The part works as well as the manufacturers design allows.
michael -
February 8, 2021
Verified Purchase
Just what I needed
Tripped over the cord and pulled the sander off the bench. Bam goes the dust nozzle.... Easy to replace.
Larry -
December 19, 2019
Verified Purchase
Perfect fit, quick ship.
Back sanding with the Mikita.
Guest -
December 2, 2019
Verified Purchase
Works as expected
It was in good condition and arrived on time.
Guest -
June 21, 2019
Verified Purchase
as expected!
Easy to find parts needed along with YouTube video for installation. Quick delivery very.
Guest -
April 10, 2020
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Dust Nozzle
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Broken dust nozzle
Bruce - April 27, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Your company sent this part on time and everything is good. Just press the new nozzle on, make sure you have the o-ring that goes on the nozzle. Thanks for everything
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The dust nozzle was cracked and leaking dust. And the Dust bag did not have a clip.
Herrin - March 28, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
I took the screws off the cover.
Remover the old dust nozzle.
Inserted the new dust nozzle.
Screwed the cover plate back on.
Then I attached the dust bag and the sander was good to go.
Remover the old dust nozzle.
Inserted the new dust nozzle.
Screwed the cover plate back on.
Then I attached the dust bag and the sander was good to go.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Dust nozzle was broken
Michael - January 19, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed the screws from the housing. Removed the broken nozzle. Replaced the nozzle. Reinstalled housing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Dust collector nozzle broke.
Joseph - January 16, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Unscrewed the cover, took the broken nozzle out, replaced with the new nozzle. Screwed the cover back on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Belt sander fell to the ground and broke dust bag elbow.
Don - March 30, 2017
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Just removed 4 screws in the housing, took out the broken part removed the o-ring carefully and reused the O-ring on the new dust nozzle put on the cover replaced for screws, works great. You just have to be careful with the O-ring, or buy a new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
12 sanders used hard
Wesley - December 6, 2016
Tool Type
Sander
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Allen wrench
Parts Used
- Dust Nozzle - 416497-7
- O Ring 28 - 213415-4
- Separator - 416494-3
- Synchro Belt - 225081-5
- Tension Roller Arm - 163398-7
- Tension Spring 4 - 231819-8
- Support Pin - 321980-0
- Tension Roller Shaft - 323829-0
- Tension Roller Comp. - 150978-8
- Pan Head Screw M4x12 - 911118-1
- Steel Plate - 344620-3
- Rubber Cork Plate - 421646-3
I have 12 sanders that are used on glass so parts wear out faster than normal. ereplacement parts supply's us with a full compliment of parts. Most of the parts are very simple to replace, simply undo a few screws pull old part, install new parts, replace screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
I dropped my Makita Belt sander and broke the dust nozzle.
Lawrence - October 29, 2016
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
I removed the four screws on the fan cover and removed the broken nozzle and replaced it with the new one which fit perfectly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Dust bag nozzle was broken
craig - November 29, 2015
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Remove side screws & cover. Insert parts, and attach cover. That's it! Everything works again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
