Bolens Parts
We sell only genuine Bolens ® parts.
Search By Model or Part Number
or
Popular Bolens Product Types See All
Popular Bolens Parts
This is an authentic replacement part manufactured for use with Craftsman walk-behind lawnmowers. The blade is angled to allow the clippings to rotate through the cutting deck to produce fine clippings for side discharge and mulching. Lawnmower blades wear out over time and can cause the grass blades to tear making frayed endings that can diminish the look of the lawn. A new mower blade will allow...
This genuine OEM replacement part is used on walk behind/push mowers. This cable consists of a metal wire cable with z-type bent ends and rubberized cover/body. The control cable stops the blade when the control handle is released on walk-behind mowers. If the cable is broken it will cause the brake to not release even when the lever is pressed.You may need pliers to complete this repair.• First...
This is an authentic manufacturer sourced replacement cotter pin. It is a standard hardware commonly used on a variety of Craftsman lawn and garden equipment. Depending on the model of your equipment it will be used in different locations to secure two parts together. Please make sure to check appropriate diagrams for correct application for this part. This metal cotter pin is sold individually. I...
This is a genuine OEM replacement part, it is sold individually.The purpose of the 738-04124A Shear Pin is to protect your snowblower.If the auger gets jammed or clogged, the Shear Pin is designed to snap at a certain point of pressure, so it will not damage any other part of the unit.
This OEM fuel tank assembly is made out of Plastic and it includes the fuel lines, fuel cap, and fuel filter. It is a common part in gas trimmers that is used to hold the fuel needed for the engine. It is very important to replace the fuel tank if it is cracked or damaged to avoid further damage or serious injuries. Make sure to drain the gas tank before starting a repair.
A carburetor basically consists of an open pipe through which the air passes into the inlet manifold of the engine. The pipe is in the form of a Venturi: it narrows in section and then widens again, causing the airflow to increase in speed in the narrowest part. Below the Venturi is a butterfly valve called the throttle valve — a rotating disc that can be turned end-on to the airflow, so as to h...
This is a genuine manufacturer-sourced replacement hardware that is commonly utilized on Craftsman lawn and garden equipment. A lock nut is a type of nut that resists loosening when it is properly threaded onto a bolt. This is a standard hardware which has multiple applications depending on your unit, make sure to check appropriate diagrams for correct location and use of this item. Please note th...
This is a manufacturer approved O-Ring designed for lawn and garden equipment. This is the O-Ring that provides an Air Tight seal between Carburetor and Cylinder Head. If doing maintenance on carburetor it is recommended to replace the O-Ring instead of re-using the old one. Over time rings and seals tend to dry out and would no longer provide proper seal compromising engines performance.
This is a Genuine replacement Belt designed for use with Riding Lawn Tractors/Mowers. This part is made out of Rubber and it is Sold Individually. This is the the Belt that drives your unit.Make sure to clean pulleys before installing the new belt to ensure top performance and longevity with your new belt. Inspect belt periodically and replace it when worn or stretched to maintain peak performance...
This is an OEM replacement part and is sold individually.Its propose is to deliver an electric current from an ignition system to the combustion chamber of a gas fueled engine.It will ignite the air fuel mixture by the spark.Spark Plugs will usually have to gapped to the manufactures specifications found in the owners manual.Over time a Spark Plug will become fouled because the air/fuel ratio may ...
This is an OEM part commonly used on Walk Behind Push Mowers. Blade Support fits between the bottom of the blade and the blade bolt to provide support for the blade. It is made out of metal to ensure parts durability. It is recommended to replace this part if the part is worn or damaged. Recommended tools for the repair are: hammer, 5/8” socket, and torque wrench.
This is a genuine OEM sourced part which is specially made for use with Craftsman handheld lawn and garden equipment. Its purpose is to deliver electric current from the ignition system to the combustion chamber. It will ignite the air fuel mixture by the spark. Unfortunately, over time a spark plug can wear out or it may get damaged eventually requiring a replacement to ensure peak performance. K...
Popular Bolens Models
.png)
.png)
.png)
All Bolens Product Types
Lawn Equipment Parts Repair Articles
Same Day Shipping
Toll Free Support
Repair Help & Videos
Customer Recomendations
Thank you very much for your quick response. You don't know how refreshing it is to have great customer service in a world where it seems to be a thing of the past. I will definitely recommend your company to my friends. Thanks again.
John M.
Georgia, USA
eReplacementParts is proud to be the Preferred Partner of dozens of leading equipment brands that build the gear you love. That means our inventory and availability are unmatched, and in some cases, we are the exclusive parts providers for these brands for their OEM parts programs.
Thank you!
Your email, , has been added to our mailing list.
Error
We were unable to add your email to our mailing list.
Copyright © 2025 eReplacementParts.com Inc.
